Author Topic: Help with Pro Race 1.2 (Read 794 times)

mikec · « **on:** July 23, 2015, 08:24:54 am »

Hey fellas,

Quick question regarding fitting some Team Dynamics Pro Race 1.2's.

Been offered some in 18", 235-45-18 and et20.

Just wondering if these will fit? I have read up a little but its all black magic to me lol.

Cheers

xjay1337 · « **Reply #1 on:** July 23, 2015, 09:06:14 am »

offsets too low.

mikec · « **Reply #2 on:** July 23, 2015, 10:31:51 am »

Does that mean they would be too wide or would need spacers?

Thanks

Tfsi_Mike · « **Reply #3 on:** July 23, 2015, 11:12:51 am »

Means that they would poke out the arches

Redemption · « **Reply #4 on:** July 23, 2015, 11:40:06 am »

They'd look like this:-

xjay1337 · « **Reply #5 on:** July 23, 2015, 12:43:44 pm »

dansmith180 · « **Reply #6 on:** July 23, 2015, 07:50:15 pm »

8j et45 with a 225 tyre is optimum.

sub39h · « **Reply #7 on:** July 23, 2015, 08:16:52 pm »

I'd imagine with an offset of 20 they're probably not the right bolt pattern either?

dansmith180 · « **Reply #8 on:** July 23, 2015, 08:56:59 pm »

Quote from: sub39h on July 23, 2015, 08:16:52 pm

I'd imagine with an offset of 20 they're probably not the right bolt pattern either?

Theyre probably for an A5, I've seen a few sets for them with really low offsets so cheaper than usual since there's less demand

xjay1337 · « **Reply #9 on:** July 27, 2015, 04:03:58 pm »

^^^^^ yup all the lower offsets are for RS4s/A5s etc. They have much wider arches lol

Author Topic: Help with Pro Race 1.2 (Read 794 times)

mikec

Help with Pro Race 1.2

xjay1337

Re: Help with Pro Race 1.2

mikec

Re: Help with Pro Race 1.2

Tfsi_Mike

Re: Help with Pro Race 1.2

Redemption

Re: Help with Pro Race 1.2

xjay1337

Re: Help with Pro Race 1.2

dansmith180

Re: Help with Pro Race 1.2

sub39h

Re: Help with Pro Race 1.2

dansmith180

Re: Help with Pro Race 1.2

xjay1337

Re: Help with Pro Race 1.2